视点相关的真实感三维风景区模拟研究与实现*

提出采用八叉树组织真实山体数据,根据视点距离采用不同的细节层次LOD表示山体各部分,并结合视觉剪裁和帧间相关性进一步减少绘制的山体,达到加速三维地形的绘制和漫游的目的。使用混合纹理映射、阴影渲染技术,并加入山谷中的水面模拟,生成具有真实感的大规模三维风景场景。实验结果表明该方法有效地减少了算法复杂度,易实现碰撞检测,大大提高了绘制效率,在PC机上能实时地生成高分辨率、具有真实感的场景,完全满足VR交互要求。     

开源平台下软件管理技术的研究*

基于开源软件平台基本特点的分析,对目前具有代表性的apt/dpkg、yum/RPM、BSD ports和portage等软件管理技术进行分析,对比和总结了现有技术特征和一般结构,探索了开源平台下软件管理技术可能的发展方向.     

一种基于安全控制的异地灾备系统设计与实现*

设计并实现了一种将实时镜像存储、系统恢复和系统监控集于一体的异地容灾系统.该系统将本地截获的写操作缓存在本地控制中心上,然后发送到远程进行重放完成异地备份.该系统通过访问控制机制解决了在传统灾难备份系统中访问控制薄弱的问题;通过差错控制保证了镜像数据的可靠性;通过密钥管理机制保证了灾备系统自身的安全.     

导磁体在汽车零件感应加热中的应用技术

本文简单介绍了导磁体工作的基本原理，并给出在汽车零件大规模生产中所积累的导磁体应用的一些经验，以阐明如何更有效地使用导磁体。     

热作模具钢热疲劳损伤因子的研究

由于Uddeholm标准图谱评定热疲劳程度尚不够完善，无法精确地评定热疲劳裂纹的级别，因此编制了一套计算机图像分析软件，对热疲劳裂纹进行定量分析，并完善了热疲劳损伤因子，用它定量地分析了进口8407和国产4C45MoSiV1热作模具钢的热疲劳性能，揭示了热模钢的热疲劳性能的变化规律，实现了热疲劳裂纹的计算机辅助评定。     

蓖麻油-马来酸酐-苯乙烯双功能润滑油添加剂的合成

传统石油基润滑油添加剂对环境的不利影响,使可生物降解的植物油基润滑油添加剂成为研究热点。以蓖麻油(CO)、马来酸酐(MAH)、苯乙烯(ST)为原料,偶氮二异丁腈(AIBN)为引发剂,甲苯为溶剂,合成了蓖麻油-马来酸酐-苯乙烯共聚物(PCMAS)。通过红外光谱(FT-IR)、核磁共振氢谱(¹H NMR)表征了蓖麻油-马来酸酐-苯乙烯共聚物的结构,采用凝胶渗透色谱(GPC)测定了聚合物的相对分子质量及其多分散性指数,采用热重分析研究了聚合物的热稳定性,并对聚合物作为润滑油降凝剂和黏度指数改进剂的性能进行了评价。结果表明：当单体质量比m(CO)∶m(MAH)∶m(ST)=1.0∶0.2∶1.2、引发剂AIBN含量占总单体的0.5%(质量分数)、反应时间4 h、反应温度90℃时,共聚物收率为68.39%,其数均相对分子质量为0.348×10⁵,多分散性指数为4.77。将蓖麻油-马来酸酐-苯乙烯共聚物添加到润滑油馏分(350～395℃)中,可降低润滑油的凝点,并提高其黏度指数。蓖麻油-马来酸酐-苯乙烯共聚物可作为一种具有降凝增黏双重功能的润滑油添加剂。     

Roles of interaction between components in CZZA/HZSM-5 catalyst for dimethyl ether synthesis via CO2 hydrogenation

The roles of interaction between two catalyst components in CuO–ZnO–ZrO₂–Al₂O₃ (CZZA)/HZSM-5 bifunctional catalyst for dimethyl ether (DME) synthesis via carbon dioxide hydrogenation were investigated. It was found that CZZA catalyst showed excellent stability during methanol (MeOH) synthesis for 100 h, while there was a severe loss of catalytic activity in the bifunctional catalyst for DME synthesis. Hence, the effects of different degrees of intimacy of two catalyst components were studied for DME synthesis, including mixed and separated modes. For the mixed mode, the particle size of catalysts and the amount of reaction intermediates were proven to influence the catalyst deactivation. For the separated mode, the catalysts showed rapid deactivation within a short time. Various characterizations indicated that the remarkable deactivation of separated mode was mainly caused by the decrease of copper active centers (e.g., sintering and oxidation) and blockage of acid sites via increased coke deposition on HZSM-5.     

Defect formation and its effect on the thermodynamic properties of Pu2Zr2O7 pyrochlore: a first-principles study

In the past decades, pyrochlores, such as Gd₂Zr₂O₇, have demonstrated great potential to immobilize nuclear wastes such as Pu, which results in the production of Pu₂Zr₂O₇. Due to the high radioactivity of Pu, it is difficult to investigate the radiation response behavior of Pu₂Zr₂O₇ and its physical properties of the damaged state experimentally. Consequently, few related data have been reported in the literature thus far. In this study, first-principles calculations have been carried out to investigate the defect formation and its effect on the thermodynamic properties of Pu₂Zr₂O₇. It reveals that Pu_Zr antisite and O_8a interstitial defects are very easy to form in Pu₂Zr₂O₇. In particular, the O_8a interstitial defect can be formed spontaneously, while it is mechanically unstable. When vacancy, interstitial or antisite defects are formed in Pu₂Zr₂O₇, and the elastic moduli and Debye temperature are decreased. Besides, better ductility is resulted. As compared with other zirconate pyrochlores, such as Gd₂Zr₂O₇, the Pu₂Zr₂O₇ is suggested to be less resistant to radiation-induced amorphization. This study demonstrates that the created defects due to self-radiation from actinide decay have remarkable influences on the thermophysical properties of Pu₂Zr₂O₇.     

High extinction-ratio microstructure fiber based on chalcogenide glasses

Extinction ratio (ER) is one of the important parameters to characterize the polarization-maintaining (PM) performance of the fiber. In this paper, we report the preparation and properties of a novel chalcogenide microstructure fiber with a high ER. We fabricate a preform using a peeled-off extrusion method. The core and cladding material of the fiber are Ge₉As₂₃Se₆₈ and Ge₁₀As₂₂Se₆₈. The preform was drawn into a fiber with an average ER of −17.08 dB. The loss of the fiber is less than 2 dB over 5.20–8.55 μm, and the minimum loss of the fiber is 0.57 dB/m at 6.2 μm. Moreover, a flat mid-infrared supercontinuum spectrum spanning from 1.53 to 12.50 μm is generated by pumping an 18-cm-long PM fiber for the first time.     

Preparation and study of stable fluorine-free superhydrophobicity of cotton fibers

This paper proposes a method of directly modifying the surface of cotton fiber to achieve super-hydrophobic properties. The process was directly utilized the long-chain alkyl siloxane and the nano-SiO₂ modified cotton cloth, which was simple to operate, low in cost and environmentally friendly. This study discussed the influence of solvent ratio, reactant content and ammonia content on hydrophobicity. The solvent ratio had the greatest influence, and the maximum water contact angle (CA) changes were70° ± 1°. The maximum water CA of the superhydrophobic cotton fabric prepared after process selection was 162 ± 1.5°; it had good acid, alkali and salt resistance. After 24 h in a solution with a pH of 1–14, CA remained almost unchanged; After 144 h in a 3.5% salt solution, CA stabilized above 132°; it had self-cleaning properties; it had good selective adsorption performance, which can quickly separate oil and water; it had good mechanical stability. After 300 times abrasion of sandpaper, which still shows hydrophobic properties.